EmonPi

From OpenEnergyMonitor Wiki
Revision as of 19:25, 27 April 2014 by Glyn.hudson (Talk | contribs)

Jump to: navigation, search

Raspberry Pi Energy Monitoring Shield


Development Thread=

http://openenergymonitor.org/emon/node/3937 http://openenergymonitor.org/emon/node/3937 [G+ Development Photos Album]

Disable Pi Serial Console

https://github.com/lurch/rpi-serial-console

$sudo wget https://raw.github.com/lurch/rpi-serial-console/master/rpi-serial-console -O /usr/bin/rpi-serial-console && sudo chmod +x /usr/bin/rpi-serial-console $ sudo rpi-serial-console disable $ sudo reboot rpi-serial-console status

Setting Up Wifi

Using How to Edimax EW-7811

$ sudo nano /etc/network/interfaces

Interfaces file looks like this. Commented out three lines and added the third lines at the bottom. auto lo

iface lo inet loopback iface eth0 inet dhcp

allow-hotplug wlan0

  1. iface wlan0 inet manual
  2. wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
  3. iface default inet dhcp

iface wlan0 inet dhcp wpa-ssid <YOUR SSID> wpa-psk <YOUR PASSPHRASE/KEY>


[CTRL] + [X] to save and exit nano

either reboot the Pi or just reboot the adapter

$ sudo ifdown wlan0; sudo ifup wlan0

Script to check for working wifi connection and restart wifi if needed https://github.com/dweeber/WiFi_Check