Difference between revisions of "EmonTx Arduino Shield"

From OpenEnergyMonitor Wiki
Jump to: navigation, search
(Design Files & Part List)
Line 72: Line 72:
 
|}
 
|}
  
==Code Guide==
+
==Example Arduino Sketches==
==Example Sketches==
+
 
 +
See emonTx Shield Folder in [https://github.com/openenergymonitor/emonTxFirmware emonTx Firmware examples GitHub Repo]
 +
 
 +
Follow instructions on the GitHub readme for required Arduino libraries

Revision as of 21:45, 11 October 2012

emonTx Arduino Shield

An open-hardware wireless energy monitoring Arduino compatible (Duemilanove,Uno and Leonardo) shield.

emonTx Shield BackemonTx Shield Front

See non-invasive section of building blocks for theory behind CT energy monitoring.

Overview

  • Apparent Power, Real Power*, Power Factor* and AC RMS voltage readings*
  • 4 x CT Current Sensor input
  • AC 9V RMS voltage sensor input
  • 433/868Mhz RFM12B (HopeRF) wireless transceiver to transmit/receive data to other OpenEnergyMonitor and JeeNode modules
  • On-board DS18B20 digital temperature sensor
  • Status LED
  • Compatible with Duemilanove,Uno and Leonardo
  • Compatible with OpenEnergyMonitor modules (emonGLCD, emonBase - NannodeRF etc.)

* with 9V AC adapter

Design Files & Part List

  • 10 x 470K (yellow, violet, yellow, gold)
  • 5 x 10uF
  • 4 x 33R 1% (orange, orange, black, gold, brown)
  • 4 x 10K 1% (brown, black, black, red, brown)
  • 4 x 4K7 (yellow, violet, red, yellow, gold)
  • 4 x 3.5mm jack (Rapid: 20-0157)
  • 1 x 0.1uF (100nF)
  • 1 x 470R (yellow, violet, brown, gold)
  • 1 x 100K 1% (brown, black, black yellow, brown)
  • 1 x 2.1mm DC barrel
  • 1 x RFM12B 868/433Mhz (HopeRf)
  • 1 x 82mm/165mm Ant
  • 1 x 3mm LED
  • 1 x DS18B20 temperature sensor (optional - not included as standard)
  • 1 x 6 pin ISP header (female)
  • 2 x 6 pin header*
  • 2 x 8 pin header*

* or 1 x 28 pin header

Recommended CT: 100A max SCT013-000 See building blocks for more information on CT's

Build Guide

Port Map

Function Arduino Port
9V AC sample ADC0
CT 1-4 ADC 1-4
DS18B20 Temperature Dig4
LED Dig9
RFM12B SS Dig10 (recommended) / Dig5
RFM12B INT Dig3 Leonardo / Dig2 Uno

Example Arduino Sketches

See emonTx Shield Folder in emonTx Firmware examples GitHub Repo

Follow instructions on the GitHub readme for required Arduino libraries