EmonTx Arduino Shield

emonTx Arduino Shield

An open-hardware wireless energy monitoring Arduino compatible (Duemilanove,Uno and Leonardo) shield.

See non-invasive section of building blocks for theory behind CT energy monitoring.

Overview

• Apparent Power, Real Power*, Power Factor* and AC RMS voltage readings*
• 4 x CT Current Sensor input
• AC 9V RMS voltage sensor input
• 433/868Mhz RFM12B (HopeRF) wireless transceiver to transmit/receive data to other OpenEnergyMonitor and JeeNode modules
• On-board DS18B20 digital temperature sensor
• Status LED
• Compatible with Duemilanove,Uno and Leonardo
• Compatible with OpenEnergyMonitor modules (emonGLCD, emonBase - NannodeRF etc.)

* with 9V AC adapter

Design Files & Part List

• 10 x 470K (yellow, violet, yellow, gold)
• 5 x 10uF
• 4 x 33R 1% (orange, orange, black, gold, brown)
• 4 x 10K 1% (brown, black, black, red, brown)
• 4 x 4K7 (yellow, violet, red, yellow, gold)
• 4 x 3.5mm jack (Rapid: 20-0157)
• 1 x 0.1uF (100nF)
• 1 x 470R (yellow, violet, brown, gold)
• 1 x 100K 1% (brown, black, black yellow, brown)
• 1 x 2.1mm DC barrel
• 1 x RFM12B 868/433Mhz (HopeRf)
• 1 x 82mm/165mm Ant
• 1 x 3mm LED
• 1 x DS18B20 temperature sensor (optional - not included as standard)
• 1 x 6 pin ISP header (female)
• 2 x 6 pin header*
• 2 x 8 pin header*

* or 1 x 28 pin header)

Recommended CT: 100A max SCT013-000 See building blocks for more information on CT's

Port Map

Function	Arduino Port
9V AC sample	ADC0
CT 1-4	ADC 1-4
DS18B20 Temperature	Dig4
LED	Dig9
RFM12B SS	Dig10 (recommended) / Dig5
RFM12B INT	Dig3 Leonardo / Dig2 Uno