Difference between revisions of "Raspberry Pi"

From OpenEnergyMonitor Wiki
Jump to: navigation, search
(Emoncms Setup)
Line 30: Line 30:
  
 
====Emoncms Setup====
 
====Emoncms Setup====
#Install emoncms following [http://openenergymonitor.org/emon/emoncms/installing-ubuntu-debian-pi this guide] accept use
+
#Install emoncms following [http://openenergymonitor.org/emon/emoncms/installing-ubuntu-debian-pi this guide] except use
 
#* [http://github.com/emoncms http://github.com/emoncms] as the GtiHub emoncms repo. This is a new 'modular' version of emoncms  
 
#* [http://github.com/emoncms http://github.com/emoncms] as the GtiHub emoncms repo. This is a new 'modular' version of emoncms  
# Navigate to
+
# Navigate to
 
+
  
 
====RFM12BPi Setup====
 
====RFM12BPi Setup====

Revision as of 11:36, 23 October 2012

RFM12Pi

RFM12Pi Front RFM12Pi installed Raspberry Pi

Overview

Design Files & Part List

Raspberry Pi Setup

Raspbian Linux Setup

  1. Download Raspbian 'Wheezy' SD card image This guide was made using 18th September 2012 release.
  2. Copy SD card image on SD card using Linux tool "dd" for any other OS see Raspberry Pi tutorial
    • Insert SD card $ df -h to view mounted partition, make note of SD card device name, for me this was 'sdb'
    • Unmount SD card $ umount /dev/sdb1 you will need to change sdb to match your SD card drive. If the card has more than one partition un mount that also $ umount /dev/sdb2
    • Write the .img to the card $ sudo dd bs=4M if=~/Downloads/2012-09-18-wheezy-raspbian.img of=/dev/sdb again you will need to replace sdb with your SD card device name and modify the location and name of the image as need.
  3. Put SD card into Pi and connect network and power
  4. Find the IP address of the Pi and SSH to it $ SSH [email protected], default password is 'raspberry'
  5. Once successfully logged in run Raspbian setup $ sudo raspi-config
    • Select Expand root partition to fill SD card finish and reboot
    • One rebooted restart SSH connection and run $ sudo raspi-config again
    • Check for updates
    • Change password for user Pi to something of your choice, make it secure it will be storing your home energy data!
    • If you plan to run the Pi as a headless dataloggin emoncms server as we do then select memory-split and choose the first setting a 240/16 split, the gives the CPU more memory at the expense of graphics which we're not using
    • We also recommend selecting boot behaviour and disabling booting straight into a desktop since this increases boot time and wastes system resources. If required a desktop can be loaded with $ startx.
    • Set locale and timezone as required
    • Finish and reboot, remember to use your new password when SSH'ing back in!
  6. (optional) set a host name for the Pi to enable host name to be used instead of IP address when connection to the Pi
    • Enter the host name your desire eg.emoncms in the file $ sudo nano /etc/hostname/ [Ctrl+X] then Y then Enter to save and exit
    • and in the file $ sudo nano /etc/hosts/ Ctrl+X] then Y then Enter to save and exit
    • Reboot the Pi and you should be able to SSH back in with $ ssh [email protected] if 'emoncms' was your chosen host name.

Emoncms Setup

  1. Install emoncms following this guide except use
  2. Navigate to

RFM12BPi Setup